CH

Water-based printing food packaging material 09

1/

Water-based ink is printed on the main substrate of PET, and water-based adhesive is used as a layer between PET and PE (lamination structure: PET/ink printing/water-based adhesive/PE). 5% alcohol is the only solvent used as a diluent for ink, so it saves 65% lesser chemical solvents compared to the traditional process and greatly reduces VOC emissions. As far as the user is concerned, no chemicals are left on the package to risk consumers' health by cross-contamination. In terms of waste, due to the low solid content of water-based ink and glue, the residue can be reduced by 25% after the ink and glue are recycled by distillation. Therefore, it was awarded the "Class II Environmental Protection Product Label" by the Environmental Protection Agency for use as food packaging. more

1/

Material Features
Related Metrials

1-033-B01.

07B.01.05

Epoxy Carbon Fiber Sheet

1-128-B01.

08B.05.02

Recycled Nylon 3D Printing Wire

rABS Ocean Waste Float Regeneration Pen

1-327-B01

rABS Ocean Waste Float Regeneration Pen

rPS Imitation Wood

1-332-F49

rPS Imitation Wood

1-388-E41

Antibacterial Oyster Shell Ethylene Vinyl Acetate Masterbatch

1-165-H34.

09B.02.01

PS Surface Plate

1-245-B55

Recycle Nylon(rPA) Fireproof Plate

1-043-B01.

07B.03.05

Shape Memory Plastic Spring

1-217-H41

Recycle PS Hinge Characteristic Pellet

1-195-B51

Water-based printing food packaging material 05

1-286-E39

Oyster Powder Vinyl base SPC snaplock floor plate(MRD-513)

1-405-D51

Chemically Recycled MABS

Supplier Information

You need to log in as a member to see the relevant information of the factory.

Member Login

Quick login

Water-based ink is printed on the main substrate of PET, and water-based adhesive is used as a layer between PET and PE (lamination structure: PET/ink printing/water-based adhesive/PE). 5% alcohol is the only solvent used as a diluent for ink, so it saves 65% lesser chemical solvents compared to the traditional process and greatly reduces VOC emissions. As far as the user is concerned, no chemicals are left on the package to risk consumers' health by cross-contamination. In terms of waste, due to the low solid content of water-based ink and glue, the residue can be reduced by 25% after the ink and glue are recycled by distillation. Therefore, it was awarded the "Class II Environmental Protection Product Label" by the Environmental Protection Agency for use as food packaging.