CH

Water-based printing food packaging material 06

1/

Water-based ink is printed on the main substrate of PET, and water-based adhesive is used as a layer between PET/highly blocked layer and PE (lamination structure: PET/highly blocked layer/ink printing/water-based adhesive/PE). The highly blocked layer in the structure is a nanoscale waterborne coating, which can replace PVDC film and reduce the dioxin pollution caused by chlorine. 5% alcohol is the only solvent used as a diluent for ink, so it saves 65% lesser chemical solvents compared to the traditional process and greatly reduces VOC emissions. Furthermore, this material can reduce 25% of waste due to its low solid content. Therefore, it was awarded the "Class II Environmental Protection Product Label" by the Environmental Protection Agency for use as food packaging. more

1/

Material Features
Related Metrials

Recycled Nylon Injeciton Hook(ETN62I-R)

1-326-N43

Recycled Nylon Injeciton Hook(ETN62I-R)

1-166-H34.

09B.02.02

PS Surface Plate

1-196-B51

Water-based printing food packaging material 06

1-059-H32.

08F.01.02

Assemblies for Recycled PC Display Partitions

1-245-B55

Recycle Nylon(rPA) Fireproof Plate

1-033-B01.

07B.01.05

Epoxy Carbon Fiber Sheet

1-219-B52

rPS Reen Wood Functional Board01

1-224-B52

rPS Reen Wood Angle Wood / Grid03

1-264-D30

ABS Oyster Shell Composite(Pen Shell)

1-174-F32.

09B.03.05

PVC Plastic Floor

Recycled Biodegradable Injection Hook(ETP-56B)

1-323-N43

Recycled Biodegradable Injection Hook(ETP-56B)

1-164-H34.

09B.01.05

PS Support Angle Strut

Supplier Information

You need to log in as a member to see the relevant information of the factory.

Member Login

Quick login

Water-based ink is printed on the main substrate of PET, and water-based adhesive is used as a layer between PET/highly blocked layer and PE (lamination structure: PET/highly blocked layer/ink printing/water-based adhesive/PE). The highly blocked layer in the structure is a nanoscale waterborne coating, which can replace PVDC film and reduce the dioxin pollution caused by chlorine. 5% alcohol is the only solvent used as a diluent for ink, so it saves 65% lesser chemical solvents compared to the traditional process and greatly reduces VOC emissions. Furthermore, this material can reduce 25% of waste due to its low solid content. Therefore, it was awarded the "Class II Environmental Protection Product Label" by the Environmental Protection Agency for use as food packaging.